Instruction Manual


Locate the logo. This is the power switch. You can press and switch between 4 modes

  • Glow
  • Flash
  • Blink
  • Off


The collar contains a 140mAh lithium ion battery (3.7v) that is rechargeable via a mini-USB cable (included).

To charge, ensure that the collar is switched OFF*.
Locate the USB port on the collar by the power switch. Carefully open the small rubber cover** and insert the small end of the USB cable into the port.

Connect the large end into any USB port (computer, laptop, USB transformer, power bank, etc.)

The collar will emit a faint but steady glow once you connect it to a power source. This is the charging indicator light; it will shut off once the battery is fully charged. It takes approximately 30-90 minutes for a full charge, depending on the battery level. A fully charged battery will last up to 5-7 hours, and will only need to be re-charged once or twice a month depending on the LED light mode and usage.

  • *Please ensure the collar is switched OFF when you are charging or it can affect the battery life and the LED.
  • **Please do not break or lose this small rubber cover! It is necessary to prevent water and dirt from damaging the collar.